Take a round turn on the bollard; let this turn take the first load.
Pass a bight under the standing part and over the top of the bollard.
Make a bight on the other side of the standing part and lay it over the bollard too; the working side comes out on the side away from the standing part.
Keep laying bights alternately on the two sides as the load requires (usually three bights).
Finish with a half hitch or a round turn on the bollard.
Easing out a heavy load under control at every step, in towing or when making a boat fast to a bollard.
When
Unknown; the sources give no date.
Who devised it
Unknown.
Where the name comes from
Also called the lighterman's hitch.
Its story
The tugboat hitch (lighterman's hitch, backhanded mooring hitch) is used for heavy towing or for making a boat fast to a bollard, post or capstan; Ashley gives it as number 2046, a way of making fast to a stanchion. No knot is actually tied: the rope is laid over the bollard in bights, changing direction round its own standing part. It casts off easily even under a heavy load, and as the turns are taken off one by one you can check at every step how well the load is under control.