Joins ropes greatly unequal in thickness by wrapping the thinner one three times around a bight (or eye) in the thicker; in thin, slippery line or twine it is more secure than the single or double sheet bend.
Joining ropes of greatly unequal thickness, especially a thin line to a heavy rope, more securely than with the single or double sheet bend; used in work with hawsers and cables.
When
Unknown; Ashley records it as #1461 in The Ashley Book of Knots (1944) but gives no date of origin (Knots 3D).
Who devised it
Unknown; Ashley names no inventor (Knots 3D).
Where the name comes from
Because it is the sheet bend with three turns; it is also called the triple becket bend (Knots 3D).
Its story
This bend is a sheet bend with the thinner rope taken around the bight of the thicker rope three times instead of once; it is also known as the triple becket bend. Ashley records it as number 1461 in his book and, as Knots 3D reports, notes that it was in regular use at sea for shifting hawsers and cables, for taking them through the hawse pipes and for passing them ashore. It is chiefly used to join ropes that are greatly unequal in thickness; Knots 3D says it is often turned to when working with 'small stuff', the seaman's term for thin line and twine.
Tied the wrong way round, with the thin rope forming the bight; Knots 3D says that for the best security the bight or eye belongs in the thicker rope, with the thin rope wrapped around it.
Weakness
The two short ends must leave the knot on one and the same side; according to Knots 3D the form with the ends on opposite sides is less reliable, and the sources give no strength figures.