Makes a rope whose tension must change from time to time, such as a tent guy, adjustable by means of a holed piece of wood that slides on it; sliding the wood slackens or tightens the rope, and friction holds it in place.
Adjusting the tension of tent ropes to the weather: easing them when wet, tightening them when dry.
When
Unknown; no date appears in the sources. It is described in Hasluck's handbook of 1907.
Who devised it
Unknown.
Where the name comes from
The name says what it does: a lashing that regulates the tension of the rope.
Its story
The regulating lashing is an old arrangement for a rope whose tension has to be changed now and then. Hasluck's handbook of 1907 (Fig. 41) gives it for tent ropes, which have to be slackened when it rains and taken up again once the weather turns dry. The rope runs through a small holed block of wood; sliding the wood up or down the rope adjusts the tension, and the rope rubbing on the edges of the hole is enough to keep the wood where it is left. In Camping and Woodcraft (1917) Kephart recommends bracing the ends of a tent with two long guy ropes: a loop in the middle of each goes over the spindle on top of the upright pole, and each end gets one of these lashings; in what he calls the storm set, the ropes are led back to the opposite corners of the tent.
On ropes that lift loads or carry people; only the friction of the rope holds the wood in place.
Weakness
It needs a separate holed piece of wood, and nothing but the rope rubbing on the edges of the hole keeps it in place; Hasluck calls that grip merely 'sufficient'.