Leave enough rope for two loops and make a small loop in the standing part as for a bowline.
Pass the working end UP through the small loop from below, bring it down leaving one loop, and pass it UP through the small loop from below again: two loops are formed.
Take the working end round BEHIND the standing part.
Pass the working end back down through the small loop; it comes out beside the two loops.
Adjust the size of the loops and tighten by pulling the standing part and the working end.
Two adjustable loops: in place of a bosun's chair and as a stretcher sling.
When
Unknown; in 1922 Felix Riesenberg described it under the name 'French bowline'.
Who devised it
Unknown.
Where the name comes from
Its traditional name; Riesenberg gave it another name because he learned it from a French sailor.
Its story
The Portuguese bowline is a bowline with two loops, and their sizes can be adjusted even after the knot is tight by working rope from one loop into the other. Felix Riesenberg, in his 1922 'Standard Seamanship for the Merchant Service', described it as the 'French bowline' because he learned it from a French sailor, which has caused confusion with another knot; its traditional name is Portuguese bowline. In sailing it was mostly used in place of a bosun's chair, and in search and rescue it is also used as a stretcher sling.