Makes two loops in the middle of a rope that stay open under load; used in caving to rig a rope to two anchors and in rescue to build an improvised seat harness.
MediumNo ABoK numberClimbingSearch and rescue
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
Take a bight in the middle of the rope and tie a figure-eight loop with the doubled rope; the bight stays at the end of the knot as its loop.
Open the loop of the eight and pass it over the whole body of the knot, taking it to the face opposite the one it comes out of.
Shove the loop back against the knot's body; this forces two strands out at the rear of the knot.
Pull these two strands, the ones nearest the loop, back through the knot; the loop slides up the two strands entering the knot and settles against the body.
These two drawn-out strands are the finished knot's two loops; set their length.
Making the leg loops of an improvised seat harness in rescue; letting cavers using single rope technique rig the rope to two anchors.
When
Unknown; no date appears in the sources.
Who devised it
Re-invented and spread under its present name by Mike Karash. According to Wikipedia the IGKT treats the same structure as an already known form of the bowline on a bight; Karash says no earlier example was found before he published it.
Where the name comes from
From Mike Karash. The French name 'nœud de fusion' (fusion knot), according to Pete Knight, refers to the knot being formed like a bowline on a bight but on a figure-eight base instead of an overhand, a fusion of two knots.
Its story
The Karash double loop is a knot with two loops tied in the middle of a rope. According to Wikipedia, the International Guild of Knot Tyers (IGKT) regards it as an already known form of the bowline on a bight, under the names 'bowline twist' and 'twisted collar bowline on a bight'; its present name comes from Mike Karash, who came upon it again as a way to rig improvised seat harnesses for rescue and made it popular among rescuers. Andy's knot site says Karash came up with it while serving for many years in the Key West Fire Department, and the French Federation of Speleology puts it forward, under the name 'nœud de fusion', as a safe replacement for the bowline on a bight in single rope technique. In a comment on Pete Knight's blog, Karash says he named and published the knot so that no one could profit from it or restrict its use.
In life-safety work without hands-on training and someone to check the knot; this page is no substitute for training.
Weakness
The knot reduces the rope's strength (49–72% efficiency in the test cited by Wikipedia, 12.5 mm static rope); Pete Knight expects it to absorb less shock than a bowline on a bight.