Gleipnir TR

Binding

Gleipnir

Binds and compresses things such as a bundle of sticks, a package or a carpet with two wraps; the two ends are passed in opposite directions through a loop formed in the middle of the rope and pulled apart, so it needs no convex surface the way a constrictor does.

Medium No ABoK number Loads and everyday jobs

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Take the middle of the rope twice round the bundle; bring both working ends to the same face of the bundle, pointing in opposite directions.
  2. Take hold of the middle part that has gone right round the bundle and twist it into a small loop whose opening faces along the rope.
  3. Pass one working end through the loop from one side and the other working end through it from the opposite side.
  4. Pull the two ends hard away from each other; the wraps squeeze the bundle, and when you let go the loop pinches both ends and holds.
  5. If the binding will not stay under steady tension, finish the ends with half hitches to make it secure.

The method was checked against: IGKT forumu: NOOB - I invented... now what? (Dahm'ın 24 Ağustos 2009 iletisi, 'How to Form Knot' ve 'Modifications'), Southee: Knots – Miscellaneous, Gleipner, Method #1 (fotoğraf dizisi).

Origin and story

Why it was needed
Compressing and tying bundles of sticks and branches: a binding tightened by pulling the two ends apart, for bundles that lack the convex surface a constrictor needs.
When
Introduced on the IGKT forum in 2009; its finder says he had found it a few years earlier.
Who devised it
Mr Dahm, who posted on the IGKT forum as 'Gleipnir'.
Where the name comes from
From its finder's forum name; Inkanyezi pointed out that in Norse myth Gleipnir is the band that held the wolf Fenrir.

Its story

The Gleipnir was introduced in August 2009 on the forum of the International Guild of Knot Tyers (IGKT) by Mr Dahm, who posted under the name 'Gleipnir'. Dahm explained that he had hit on it a few years earlier while squeezing branches and twigs into tight bundles to put out for the rubbish collection: a constrictor wants a convex surface to sit on, and a heap of branches gave him neither that nor a spare finger to hold the knot down. He also wrote that he used it for pulling fences, tying furniture to a car roof, and binding packages and carpets. He himself suggested 'Floating Constrictor' or 'Concave Constrictor'; Inkanyezi, another forum member, first said 'Dahm Floating Constrictor', then suggested Gleipnir might be a good name, pointing out that in the Norse story Gleipnir is the band that held the wolf Fenrir fast. Over time 'the Gleipnir' became the name used on the forum; Southee's knot site likewise credits the knot to someone called Dahm and notes that the IGKT forum thought well of it.

Source: IGKT forumu: NOOB - I invented... now what? (Ağustos 2009–2010), Southee: Knots – Miscellaneous (Gleipner).

No sourced Turkish name yet.

Where not to use it
On a single rigid object such as a pipe; its inventor says he did not design it for that job, and on the forum its grip is reported to be weak on a thin pipe.
Weakness
It holds best under steady tension; where it may slacken, the ends should be finished with half hitches, and it does not tighten well in very rough rope such as manila or on a sticky surface the rope cannot slide over.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.