EStar stopper knot TR

Stopper

EStar stopper knot

Makes a bulky stopper that does not slip in very slippery rope such as Dyneema, keeping the line from escaping a block, fairlead or hole.

Medium No ABoK number Sailing and boatingLoads and everyday jobsCamping and scouting

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

How to tie it

  1. Take a turn around the standing part with the working end and bring it around its own part as well.
  2. Take the working end around the standing part once more and tuck it UNDER itself, forming a buntline hitch on the standing part.
  3. Pass the working end down through the middle of the buntline hitch; two loops appear on top.
  4. Pass the working end sideways through both of these loops.
  5. Tighten the knot by pulling first the buntline hitch, then the standing part and finally the working end.

The method was checked against: Animated Knots: EStar Stopper Knot, Knots 3D: Estar Stopper Knot.

Origin and story

Why it was needed
A stopper that does not slip in slippery high-modulus rope such as Dyneema or Spectra, where traditional stoppers slip.
When
Unknown; the sources give no exact date. A post on the IGKT forum on 17 June 2014 describes it as newly added to Animated Knots.
Who devised it
Described by Evans Starzinger (Animated Knots); Knots 3D names him as its developer.
Where the name comes from
From an abbreviation of Starzinger's name (E. Starzinger) (Knots 3D).

Its story

The EStar stopper takes its name from Evans Starzinger (E. Starzinger). Knots 3D introduces him as a seasoned blue-water sailor who, with his partner Beth Leonard, made two voyages round the world and logged more than 130,000 nautical miles. Animated Knots says he compared several knots used as stoppers and that this one alone held without slipping in Dyneema. It is a close relative of the EStar hitch, which Starzinger put forward for slippery rope: a buntline hitch is first made on the standing part, the working end is then led back down through it and through the loops that in the EStar hitch would wrap the bar, so that the harder the pull, the more firmly the standing part and the working end are pressed against each other. In a June 2014 post on the IGKT forum it is listed among the recent additions to Animated Knots.

Source: IGKT forumu: 'Error in Grog Animated Knots animation?' (17 Haziran 2014), Animated Knots: EStar Stopper Knot, Knots 3D: Estar Stopper Knot.

No sourced Turkish name yet.

Where not to use it
On ends that must be untied later; after a heavy load it cannot be untied.
Weakness
It jams after heavy loading and can only be removed by cutting; it is slightly lopsided and needs a long working end to tie.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.