Makes a fixed loop in the end of a rope; it gives the bowline with a Yosemite finish an extra tuck (a turn and a tuck, according to Knots 3D), making it harder to work loose, and Knots 3D presents it as a tie-in knot for climbing.
HardNo ABoK numberClimbingSearch and rescue
Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.
Removing the bowline's tendency to work loose when unloaded or shaken, especially when tying in to a climbing harness.
When
Earliest known demonstration May 2003 (UKClimbing, Alan James; Knots 3D); according to The Bear Essentials, that article traces it back to 1993.
Who devised it
Disputed: one line leads to the British mountain guide Rowland Edwards, the other to the Australian Harry Butler, who found it independently around 2015.
Where the name comes from
From Rowland Edwards; after Harry Butler it is also known as Harry Butler's Yosemite Bowline, or simply Butler's bowline.
Its story
The Edwards bowline is a strengthened form of the bowline with a Yosemite finish; the Yosemite finish is the closing tuck in which the working end wraps one side of the eye and goes back through the knot. Knots 3D says the Edwards adds one more turn and tuck to that finish, while The Bear Essentials speaks of a single extra tuck that moves the tail to come out on the inner side of the eye. The earliest demonstration Knots 3D found is an article by Alan James on the UKClimbing website, dated May 2003: James had been shown it by Steve Anson, who had it from Rowland Edwards, a British mountain guide and climbing instructor. Rowland's son Mark Edwards showed it in a YouTube video in 2014, and Harry Butler of Australia came up with the same knot on his own around 2015. The Bear Essentials writes that the 2003 article traces the knot back to 1993, that its origin is still disputed, and that several different forms circulate under the name.
For tie-ins that a partner must check quickly, or in teams that do not know this exact form: The Bear Essentials notes that several forms go by this name and recommends the figure-eight follow-through when no reliable partner check is available.
Weakness
If the tail is drawn up before the nipping loop and standing part are set it can shift and spoil the knot; The Bear Essentials says no break test has been published for it and that it is hard to untie after a heavy load (Knots 3D says it does not jam).