Bottom-loaded release hitch TR

Friction hitch

Bottom-loaded release hitch

Wraps an accessory cord with a figure-eight loop at each end round a climbing rope so that it grips when loaded, yet slides even under load when the release end is given a hard pull.

Medium No ABoK number Climbing

Life safety: This knot is used in climbing, rescue or tree work. This app does not replace hands-on training; for life-safety work, practise under an instructor.

The animation and practice area for this knot are not ready yet. Available now: Overhand knot, Figure-eight knot, Double overhand knot, Stevedore knot, Ashley's stopper knot, Heaving line knot, Monkey's fist, Slip knot, Sheet bend, Double sheet bend, Carrick bend, Fisherman's knot, Double fisherman's knot, Water knot, Flemish bend (figure-eight bend), Offset overhand bend, Zeppelin bend, Hunter's bend, Butterfly bend, Blood knot (barrel knot), Albright special, Nail knot, Harness bend, Heaving line bend, Racking bend, Reever knot, Simple Simon over, Beer knot, Adjustable bend, Bowline, Double bowline, Water bowline, Bowline on a bight, Spanish bowline, Yosemite bowline, Cowboy bowline, Running bowline, Eskimo bowline, Figure-eight loop, Directional figure eight, Double figure-eight loop, Figure-of-nine loop, Alpine butterfly loop, Overhand loop, Angler's loop (perfection loop), Dropper loop, Farmer's loop, Artillery loop (manharness knot), Fireman's chair knot, Honda knot, Zeppelin loop, Bimini twist, Clove hitch, Slipped clove hitch, Cow hitch (lark's head), Half hitch, Two half-hitches, Round turn and two half-hitches, Anchor bend (fisherman's bend), Timber hitch, Killick hitch, Rolling hitch, Magnus hitch, Taut-line hitch, Buntline hitch, Cleat hitch, Highwayman's hitch, Tumble hitch, Mooring hitch, Halter hitch, Pile hitch, Constrictor knot, Strangle knot, Trucker's hitch, Siberian hitch, Marlinespike hitch, Pipe hitch, Tensionless hitch, Munter hitch, Cat's paw, Ground-line hitch, Becket hitch, Halyard bend, Lobster buoy hitch, Barrel hitch, Bale sling hitch, Swing hitch, Prusik knot, Klemheist knot, Bachmann knot, Autoblock (French prusik), Blake's hitch, Distel hitch, Adjustable grip hitch, Reef knot (square knot), Granny knot, Thief knot, Miller's knot, Packer's knot, Boa knot, Transom knot, Sheepshank, Chain sinnet, Square lashing, Diagonal lashing, Shear lashing, Common whipping, Sailmaker's whipping, Improved clinch knot, Palomar knot, Uni knot, Trilene knot, Arbor knot, Turle knot, Turk's head knot, Carrick mat, Wall and crown knot, Matthew Walker knot, Diamond knot, Chinese button knot, Celtic button knot, Pan Chang knot, Good luck knot, True lover's knot, Friendship knot.

Origin and story

Why it was needed
Prusik-type friction hitches cannot be freed once they jam under load; a friction hitch that could be released with the weight still on it was needed so climbers would not be left stuck on the rope.
When
Early 1980s: Budworth dates the top-loaded version to about 1980, and Chisnall's release hitches were published in Knotting Matters in July 1984.
Who devised it
Rob (Robert) Chisnall, a climber from Ontario, Canada; Budworth gives the bottom-loaded hitch as a version of his release hitch.
Where the name comes from
The sources do not explain the name; Chisnall describes these hitches as being freed, once jammed, by a sharp pull on what he calls the release end. 'Bottom loaded' is not explained in the sources either.

Its story

Rob Chisnall, a climber from Ontario, Canada, published seven 'release hitches' he had worked out and tested himself in Knotting Matters, the journal of the International Guild of Knot Tyers, in the summer of 1984. His concern was that prusik-type friction hitches jam once loaded and cannot be undone while the weight is on them; he wrote that climbers had been left stuck on the rope this way, and that some accidents had been fatal. These hitches have two ends, one that carries the load and one that runs along the descent line inside every wrap; a sharp pull on that release end makes the top wrap slip, which frees the one below, until the whole hitch slides. In the same piece Chisnall stresses that they were not yet accepted climbing knots and should be tried with care so they could be judged. Geoffrey Budworth's encyclopedia credits the top-loaded release hitch to Chisnall around 1980 and presents the bottom-loaded one as a version of it; another of his books says both were Chisnall's.

Source: Rob Chisnall, 'Release Hitches', Knotting Matters (International Guild of Knot Tyers) sayı 8, Temmuz 1984, s. 10-11 (Internet Archive), Geoffrey Budworth, The Ultimate Encyclopedia of Knots & Ropework (London: Anness Publishing, 1999; Barnes & Noble baskısı), s. 134-135 (Internet Archive), Geoffrey Budworth, The Book of Knots (2003) ve The Knot Book (1985), 'Release hitch' bölümleri; yalnız Internet Archive tam metin arama özetleri görüldü (kitaplar ödünç-yalnız).

No sourced Turkish name yet.

Where not to use it
In any climbing or descent system without hands-on training and a backup; its originator wrote in 1984 that such hitches were not yet accepted climbing knots.
Weakness
According to Budworth it bites even when tied untidily, but if slack is left in it the wraps spread apart under load, and it then takes a very hard pull on the release end to make it slide.

Similar and alternative knots

Sources and verification

  • The card was written in our own words from Wikipedia and Wikidata data; the tying method has not yet been checked against two sources.