Ties a rope to a ring or bar with the standing part held between two passes; it holds for a while with the end kept taut, becomes permanent with two half hitches and is easy to untie even under strain.
MediumABoK 1852Sailing and boatingLoads and everyday jobs
Take the working end round BEHIND the standing part to its other side.
Pass the working end through the ring a second time, this time in the opposite direction to the first pass, so that the standing part lies between the two passes.
To hold the rope only for a while, keep the working end taut; the hitch comes free as soon as you want.
To make it permanent, tie two half hitches with the working end round the standing part and pull tight.
Holding a rope in a ring for a while and being able to free it at once, even under load (warping a ship, making a line fast to a buoy anchor); making it permanent with two half hitches when needed.
When
Unknown; it is described in Hasluck's handbook in 1907 and in Öhrvall's book in 1916.
Who devised it
Unknown.
Where the name comes from
The sources do not explain the name; the old English name is 'backhanded sailor's knot', the Swedish names are 'minörstek' and 'bakhandsknop', and stage riggers call it the 'high tie' (Knots 3D).
Its story
The handbook edited by Paul N. Hasluck and published in 1907 calls it the 'backhanded sailor's knot': the end is led through a ring, taken behind the standing part, led through the ring a second time and made fast with a pair of half hitches taken on the standing part. In 1916 the Swede Hjalmar Öhrvall describes the same structure as 'minörstek' or 'bakhandsknop': it was used to hold a hawser in a ring for a while when warping a ship, holding fast as long as the end is kept taut and coming free whenever wanted, and the coast artillery's mine men used it to make a line fast to a small buoy anchor. Öhrvall puts its limited use at sea down to the way it strains and wears the rope. Knots 3D notes that stage and film riggers know it as the 'high tie' and that it serves as an anchor point when loads are secured for transport.
Where straining and wearing the rope is unwelcome; Öhrvall writes that it strains and wears the rope considerably and that this is probably why it sees little use at sea.
Weakness
Without the half hitches it holds only as long as the end is kept taut, and its tight turns strain and wear the rope.