Overhand loop TR
Overhand loop, tied and tightened

Loop

Overhand loop

Turkish: Kör düğüm

Makes a quick loop by tying an overhand knot with a doubled rope.

Easy ABoK 518, 1009, 1046 Loads and everyday jobsFishing

How to tie it

  1. Leave a long tail and make a loop: bring the working end OVER the standing part. (When tied in the bight, the doubled rope does this.)
  2. Tuck the end UNDER the standing part into the loop.
  3. Bring the end out OVER the top of the loop: a loose overhand knot.
  4. Take the end OVER the bar (ring, karabiner) and back UNDER it: this is the eye.
  5. Feed the end back into the knot where it came out and follow the first path in reverse, alongside it: OVER the top edge, UNDER the standing part.
  6. Keep following: OVER the standing part.
  7. Go round the loop and UNDER both strands.
  8. Go down beside the standing part: OVER two strands, then UNDER two.
  9. Pull the eye and both strands to tighten; the strands should lie side by side.

The method was checked against: Wikipedia: Overhand loop, AFAD, "Akarsuda Arama ve Kurtarma Temel Eğitimi" (2025), s. 36.

Turkish names, by who uses them

  • Climbers: Kör düğüm
  • General use: Yarım göz üzerine basit düğüm

Main Turkish name from climbers · AFAD İpli Kurtarma

Sources for the names
Where not to use it
Where it must be untied after loading.
Weakness
Jams very hard after heavy loading.

Similar and alternative knots

Sources and verification