Diagonal lashing TR

Diagonal lashing: How to tie it

The animation and practice area on this page need JavaScript. The steps are written out below.

Steps

  1. The timber hitch is traced here from its tail. Draw the twists of the tail: they will end up wrapped round the returning leg of the noose.
  2. Draw the turn round the standing part; the end of the twists is tucked OVER the leg where it turns.
  3. Lead the returning leg through the twists (OVER, UNDER in turn) and round BEHIND (UNDER) both poles at the crossing.
  4. Bring the standing part back IN FRONT of (OVER) the poles and through the turn: the timber hitch is done. Pulling it draws the poles together.
  5. Take the rope up and OVER the front pole to the upper angle of the crossing.
  6. First set, on the diagonal opposite the timber hitch: down OVER everything in front, up UNDER everything behind.
  7. Make two more turns, each outside the one before: three turns on this diagonal.
  8. Go over the top and UNDER the back pole to the other diagonal. Second set: OVER everything in front, UNDER everything behind; it crosses the first set.
  9. Make two more turns of the second set, each outside the one before: three turns on this diagonal too.
  10. Two frapping turns BETWEEN the poles: UNDER the front pole and OVER the back one, pulling all the turns tight.
  11. Finishing clove hitch on the front pole: OVER the pole and back BEHIND (UNDER) it.
  12. Cross the end OVER its own part.
  13. Second turn the same way: OVER the pole and back UNDER it.
  14. Tuck the end UNDER the diagonal and lead it out.
  15. Tighten the lashing.

Back to the knot page