Hitch
Halyard bend
Turkish: Kandilisa bağı
Ties a halyard firmly to a sail or flag ring.
How to tie it
- Wrap the end twice round the spar: OVER it and back UNDER it, the second turn beside the first.
- Take the end back round the standing part: across OVER it, then up.
- Pass the end under all the turns (between the turns and the spar): UNDER the standing part, OVER the leg coming down behind, UNDER the leg coming up in front, OVER the last leg; it comes out by the last turn.
- Turn the end back, take it OVER the turns and tuck it UNDER the first turn (the standing part).
- Pull the standing part to settle the turns on the spar.
The method was checked against: Wikipedia: Halyard bend, A. Hyatt Verrill, Knots, Splices and Rope Work (1917), Bölüm III, Şekil 54.
Turkish names, by who uses them
- Scouts: Kandilisa bağı
Other English names: v. 15, 1911
Main Turkish name from scouts · Sakarya İzcileri
Sources for the names
- Where not to use it
- Where it must be untied often.
- Weakness
- Jams.
Similar and alternative knots
Sources and verification
- Wikipedia: Halyard bend
- Wikidata: Q15958612
- The tying steps were played in the rope engine to produce the checking signature; the comparison with two independent sources is in docs/pilot-baglar.md.